Products
SS316 2-Piece Full-Port Ball Valve
Model FB-2P-1000 · 1000 WOG · NPT Threaded Ends
A heavy-duty investment-cast stainless steel 316 ball valve engineered for general industrial service. Full-port bore for minimum flow restriction, reinforced PTFE seats, and a blowout-proof stem with anti-static device.
Engineered for reliability
Every FB-2P valve is hydrostatically tested at 1.5× rated pressure and pneumatically seat-tested per API 598 before shipment.
Blowout-Proof Stem
Stem is inserted from below, preventing ejection under pressure surges.
Reinforced PTFE Seats
15% glass-filled PTFE resists cold flow, extends service life at higher temps.
Anti-Static Device
Spring-loaded pin between ball and stem safely dissipates static charge.
ISO 5211 Mounting
Direct-mount pad accepts pneumatic or electric actuators without brackets.
Built to isolate,
engineered to last.
- Origin
- Investment-cast in ISO 9001 foundry
- Service life
- > 100,000 cycles at rated conditions
- Compliance
- MSS SP-110 · API 598 · CE / PED
- Lead time
The FB-2P Ball Valve is a precision-engineered flow isolation device designed for demanding industrial environments — where tight shutoff, corrosion resistance and mechanical endurance are not optional.
Machined from investment-cast ASTM A351 CF8M stainless steel, every FB-2P valve pairs a mirror-polished full-port ball with reinforced PTFE seats to deliver bubble-tight shutoff across the full pressure and temperature envelope. The two-piece body allows in-line servicing without breaking downstream piping — a small detail that saves hours in real maintenance windows.
A blowout-proof stem, anti-static device and ISO 5211 direct-mount pad make the valve immediately compatible with pneumatic or electric actuation, whether it sits on a skid, a chemical dosing line or a fire-protection standpipe. Each unit is hydrostatically tested to 1.5× its rated pressure and pneumatically seat-tested per API 598 before it ever leaves the factory floor.
The result is a valve that does exactly one thing, and does it for a very long time: open, close, seal. No leaks, no drift, no surprises.
"We replaced three failing brass valves with FB-2P units on our caustic dosing line. Four years later, zero leaks, zero maintenance calls."
— Plant Engineer, Water Treatment Facility · Rotterdam
Full specifications
Complete technical data for model FB-2P-1000. Contact engineering for custom trims, oxygen-cleaned versions, or NACE MR0175 compliance.
| Design Standard | MSS SP-110 / ISO 17292 |
| Face-to-Face | ASME B16.10 |
| End Connection | NPT Female, ASME B1.20.1 |
| Testing | API 598 |
| Pressure Rating | 1000 psi WOG (69 bar) non-shock cold water/oil/gas |
| Temperature Range | -20°C to +180°C (-4°F to +356°F) |
| Port Type | Full Port (unrestricted bore) |
| Operation | Manual lever, 90° quarter turn |
| Mounting Pad | ISO 5211 F03/F04/F05 (size dependent) |
| Fire-Safe | Optional per API 607 (6th Ed.) |
Get in touch
Need the right valve solution for your project?
24 hours.